EasyManuals Logo

McCulloch B26PS User Manual

McCulloch B26PS
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
English – 25
MAINTENANCE
Maintenance schedule
The following is a list of the maintenance steps that must be performed on the machine. Most of the items are described
in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator's
Manual. More extensive work must be carried out by an authorized service workshop.
Maintenance
Weekly
maintenance
Monthly
maintenance
Annually
maintenance
Clean the outside of the machine. X
Make sure the throttle trigger lock and the throttle function
correctly from a saf
ety point of view.
X
Check that the stop switch works correctly. X
Check that the cutting attachment does not rotate at idle. X
Clean the air filter. Replace if necessary. X
Check that the guard is undamaged and not cracked. Replace
the guard if it has been e
xposed to impact or is cracked.
X
Check that the trimmer head is undamaged and not cracked.
Replace the tr
immer head if necessary.
X
Check that nuts and screws are tight. X
Check that there are no fuel leaks from the engine, tank or fuel
lines
.
X
Check that the throttle cable is correctly tensioned X
Check the starter and starter cord. X
Check that the vibration damping elements are not damaged. X
Clean the outside of the spark plug. Remove it and check the
electrode gap
. Adjust the gap to 0,65 mm or replace the spark
plug. Check that the spark plug is fitted with a suppressor.
X
Clean or replace the spark arrestor mesh on the muffler (only
applies to m
ufflers without a catalytic converter).
X
Clean the outside of the carburettor and the space around it. X
Check that the bevel gear is filled three-quarters full with
lubr
icant. Fill if necessary using special grease.
X
Clean the machine’s cooling system. X
Check the fuel filter for contamination and the fuel hose for cracks
or other def
ects. Replace if necessary.
X
Check all cables and connections. X
Check the clutch, clutch springs and the clutch drum for wear.
Replace if necessar
y by an autorized service workshop.
X
Replace the spark plug. Check that the spark plug is fitted with a
suppressor.
X

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the McCulloch B26PS and is the answer not in the manual?

McCulloch B26PS Specifications

General IconGeneral
Engine Displacement26 cm³
Power Output0.75 kW
Cutting Width43 cm
Weight5.4 kg
Engine Type2-stroke
Shaft TypeStraight
Handle TypeLoop
Fuel Tank Volume0.55 liters

Related product manuals