KEY TO SYMBOLS
2 – English
Symbols
WARNING! A brushcutter or trimmer can be
dangerous if used incorrectly or carelessly,
and can cause serious or fatal injury to the
operator or others. It is extremely important
that you read and understand the contents of
this operator’s manual.
Please read the operator’s manual carefully
and make sure you understand the
instructions before using the machine.
Always wear:
• Wear a protective helmet where there is a
risk of falling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
This product is in accordance with
applicable EC directives.
Watch out for thrown objects and
ricochets.
The operator of the machine must ensure,
while working, that no persons or animals
come closer than 15 meters.
Machines fitted with saw blades or grass
blades can be thrown violently to the side
when the blade comes into contact with a
fixed object. This is called blade thrust.
The blade is capable of amputating an arm
or leg. Always keep people and animals at
least 15 meters from the machine.
Arrows which show limits for handle
positioning.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
Make sure your hair does not hang below
shoulder level.
Choke: Set the choke control in the choke
position.
Set the choke control in the RUN position.
Primer bulb
Refuelling.
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in the Technical data chapter
and on the label.
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
The engine is switched off by moving the
stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug
cap must be removed from the spark
plug when assembling, checking and/or performing
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always
be used.
10000
To Next Page
Loading...
Need help?
General
