McCulloch BVM 240 User Manual

INSTRUCTION MANUAL
IMPORTANT INFORMATION
: Please r ead these instructions carefully and make
sure you understand them before using this unit. Retain these instructions for future
reference.
530163816 3/5/03
MANUEL D’INSTRUCTIONS
RENSEIGNEMENTS IMPORTANTS:
Avant d’utiliser cet appareil, veuillez lire
atentivement les instructions et assurez--vous de les avoir comprises. Conser vez
les instructions pour référence ultérieure.
BETRIEBSANWEISUNG
WICHTIGE INFORMATION:
Lesen Sie diese Hinweise zur Handhabung des
Geräts aufmerksam durch. V er w enden Sie es erst, wenn Sie sicher sind, daß Sie
alle Anweisungen verstanden haben und gut aufbewahr en.
MANUAL DE INSTRUCCIONES
INFORMACIÓN IMPORTANTE:
Lea atentamente las instrucciones y
asegúrese d e entenderlas antes de utilizar esta aparato. Conserve las instruc-
ciones para la referencia en el futuro.
BVM 240
GB
FR
DE
ES
LIBRETTO D’ISTRUZIONI
INF ORMA ZIONI IMPO RTANTI
: Siete pregati di leggere attentamente questo
istruzioni e prendere dimestichezza con il prodotto prima di usario. Mantenga
queste istruzioni per riferimento futuro.
IT
NL
HANDLEIDING
BELANGRIJKE IMPORTANTS:
Lees deze instructies zorgvuldig en wees er
zeker van dat uze begrijpt alvorens de blower te gebrulken en bewaar ze voor
toekomstige raadpleging.

McCulloch BVM 240 Specifications

General

Brand	McCulloch
Model	BVM 240
Category	Blower
Language	English

Summary

Safety Rules and Precautions

Know Your Unit

Understand and follow all warnings and safety rules before operating the unit.

Plan Ahead for Safe Operation

Always wear eye and ear protection and proper footwear when operating.

Operating Safety Guidelines

Fuel Handling Precautions

Handle fuel in outdoor areas, away from sparks and flame. Use approved containers.

Safe Unit Operation Practices

Inspect unit before use, avoid hazards, maintain balance, and avoid dangerous environments.

Maintenance Overview

General Maintenance Recommendations

Have maintenance performed by authorized dealers; use recommended parts.

Product and Assembly Information

Blower Tube Assembly

Attach blower tube to outlet, aligning rib and groove; secure with knob.

Vacuum Bag Assembly

Operating the Blower/Vacuum

Operating Position and Tips

Before Starting Engine

Read fuel information and safety rules before fueling the unit.

Fueling Engine Procedures

Mix unleaded petrol with McCulloch 2-cycle oil at a 40:1 ratio.

Stopping the Engine

Starting the Engine

Starting a Cold Engine

Use full choke, prime bulb 8 times, pull rope, then adjust choke.

Starting a Warm Engine

Starting a Flooded Engine

Maintenance Procedures

Check Fasteners and Parts

Inspect Spark Arresting Screen

Check for Damaged Parts

Clean Air Filter

Replace Spark Plug

Replace Fuel Filter

Troubleshooting Guide