Need help?Do you have a question about the McCulloch MB320BV and is the answer not in the manual?
Information on specifications, illustrations, and product references.
Guidance on obtaining service and dealer information.
Core safety guidelines for operating the unit.
Specific precautions for gasoline-powered equipment.
General safety precautions during unit operation.
Specific safe practices when using the blower function.
Specific safe practices when using the vacuum function.
Additional safety warnings not covered elsewhere.
Important information regarding vibration exposure and health.
Describes the unit's uses as a blower and vacuum.
Illustration and labels for the unit assembled as a blower.
Illustration and labels for the unit assembled as a vacuum.
Steps to attach the blower tube and configure for blower use.
Steps to attach vacuum tubes and bag for vacuum use.
Steps to attach the vacuum bag to the unit.
Steps to detach and remove the vacuum bag.
Instructions for attaching and adjusting the shoulder harness.
Guide to mixing the correct fuel and oil ratio.
Precautions when using blended gasoline fuels.
Recommendations for using fuel additives.
Step-by-step guide for starting the engine.
Steps for safely stopping the engine.
Proper grip and stance for operating the unit.
General advice for effective and safe operation.
Guidance on using the unit as a blower.
Guidance on using the unit as a vacuum.
Steps for safely emptying the vacuum bag.
Schedule for required maintenance procedures.
Instructions for cleaning and maintaining the air filter.
Detailed steps for cleaning the air filter.
Steps for reattaching the air filter/muffler cover.
Procedures for maintaining the spark arrestor.
Instructions for adjusting the carburetor idle speed.
Steps for replacing the spark plug.
How to clean the exterior of the unit.
Instructions for cleaning the vacuum bag.
Guidelines for storing the unit.
How to clear blockages in tubes or impeller.
Procedure for storing the unit for an extended period.
Safety tips for transporting the unit.
Common causes and solutions for starting issues.
Common causes and solutions for idling problems.
Common causes and solutions for acceleration issues.
Common causes and solutions for power loss or stalling.
Common causes and solutions for functional failures.
Technical specifications for the engine.
Technical specifications for blower and vacuum functions.
Explanation of owner's warranty responsibilities.
Owner's role in maintaining warranty coverage.
Details of the manufacturer's warranty coverage period.
Procedure for obtaining warranty service.
Situations not covered by the limited warranty.
Information on how state laws affect the warranty.
To Next Page
General