Need help?Do you have a question about the McCulloch Electramac 95390053200 and is the answer not in the manual?
Steps for assembling the chainsaw bar and chain.
Adjusting chain tightener knob and checking chain movement.
Ensuring the bar groove is clean and free of debris.
Importance of checking chain tension during the break-in period.
Instructions for filling the chain lubricating oil tank.
Procedure for starting the chainsaw motor by gripping handles.
How the safety chain brake operates and stops the chain.
Procedure to reset the chain brake after use by pulling the lever.
Starting the motor and using the spike against the log.
Cutting logs resting on their ends from top and bottom.
Cutting logs on a sawhorse with at least one free end.
Important considerations and experience needed for felling trees.
Steps for felling trees using directional and main cuts.
Instructions for sharpening the chainsaw bar and chain.
Bar maintenance, including cleaning and reversing installation.
Ensuring motor ventilation slots are free and clean.
Technical specifications for weight, oil capacity, and bar lengths.
Measured vibration levels at operator's hand positions.
Technical data on rated input and sound power levels.
General advice for safe operation of the chainsaw.
Meaning of symbols used in the manual for safety and operation.
Ensuring mains voltage matches chainsaw rating and power type.
Using approved, insulated cables and connecting to a power socket.
To Next Page
General
