20 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/
EC. Reported sound power level for the machine has been measured with the original cutting attachment that gives the
highest level. The difference between guaranteed and measured sound power is that the guaranteed sound power also
includes dispersion in the measurement result and the variations between different machines of the same model
according to Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard
deviation) of 1 dB (A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
2
.
Technical data SUPERLITE 4528 ERGOLITE 6028
Engine
Cylinder displacement, cm
3
21,7 21,7
Cylinder bore, mm 32 32
Stroke, mm 27 27
Idle speed, rpm 2800 2800
Recommended max. speed, rpm 9000 9000
Max. engine output, acc. to ISO 8893, kW/ rpm 0,6/7800 0,6/7800
Catalytic converter muffler Yes Yes
Speed-regulated ignition system Yes Yes
Ignition system
Spark plug NGK CMR6A NGK CMR6A
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Fuel tank capacity, litre 0,3 0,3
Weight
Weight without fuel, kg 4,8 5,0
Noise emissions
(see note 1)
Sound power level, measured dB(A) 100 100
Sound power level, guaranteed L
WA
dB(A) 101 101
Sound levels
(see note 2)
Equivalent sound pressure level at the operator’s ear, measured
according to EN ISO 10517, dB(A):
93 93
Vibration levels
(see note 3)
Equivalent vibration levels (a
hv,eq
) at handles, measured according to EN
ISO 10517, m/s
2
Front/rear handles: 3,5/4,4 4,1/4,2
Blades
Type Double sided Double sided
Length, mm 450 590
Blade speed, cuts/min 4050 4050
To Next Page
Loading...
Need help?
General
Weight and Dimensions
