EasyManua.ls Logo

McCulloch M110-77TC CLASSIC User Manual

McCulloch M110-77TC CLASSIC
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
M110-77TC CLASSIC
Original Instructions in English, all others are translations.
Instruction manual
Please read these in struc tions care ful ly
and make sure you un der stand them
before using this ma chine.
Manuel d’instructions
Merci de lire trés attentivement le manuel
d'instructions. Assurez-vous d'avoir tout
compris avant d'utiliser ce tracteur.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed
accertatevi di averle comprese bene.
Euro
115 80 00-20 Rev. 1
Bedienungsanleitung
Lesen Sie diese Anweisungen sorgfältig
durch und machen Sie sich mit dem
Inhalt vertraut, bevor Sie diese Maschine
benutzen.
Manual de las instrucciones
Por favor lea cuidadosamente y
comprenda estas intrucciones an tes
de usar esta maquina.
Instructieboekje
Lees deze instructies aandachtig en zorg
dat u ze begrijpt voordat u deze ma chine
gebruikt.
Question and Answer IconNeed help?

Do you have a question about the McCulloch M110-77TC CLASSIC and is the answer not in the manual?

McCulloch M110-77TC CLASSIC Specifications

General IconGeneral
Engine Displacement344 cm³
Cylinder1
Transmission TypeManual
Number of Gears Reverse1
Cutting Width77 cm
Cutting Height Min38 mm
Cutting Height Max102 mm
Cutting Height Steps6
Blade EngagementManual
Collector Volume200 l
Wheel Size Front13x5-6
Wheel Size Rear16x6.5-8
EngineBriggs & Stratton

Summary

Safety Rules

TRAINING

Learn how to use the equipment safely and understand controls.

PREPARATION

Steps to take before operating the machine for safe use.

OPERATION

Guidelines for safe operation of the ride-on mower.

MAINTENANCE AND STORAGE

Procedures for maintaining and storing the machine safely.

PRODUCT SPECIFICATIONS

Multilingual Product Specifications

Technical details of the tractor, including capacity, oil, and spark plug.

Understanding Symbols

Safety and Operation Symbols

Explanations of symbols found on the machine or in the manual.

2. Assembly

Unassembled Parts

Instructions for identifying and assembling parts.

Steering Wheel Assembly

Instructions for assembling the steering wheel and its components.

Seat Installation

Steps for correctly installing and adjusting the tractor seat.

Battery Installation

Guide for safely installing the tractor battery and connecting terminals.

Bagger Parts and Assembly

Details on grass bagger parts and instructions for assembly.

3. Functional Description

Controls Overview

Identification and function of all controls on the tractor.

4. Before Starting

Fueling and Pre-Start Checks

Procedures for fueling the tractor and performing essential pre-start checks.

4. Oil Level

Oil Level Check Procedure

How to check and maintain the engine oil level.

4. Tire Air Pressure

Tire Pressure Check Procedure

Ensure tires are properly inflated to the recommended PSI.

5. Driving

Starting the Engine

Steps for starting the tractor engine safely.

Operator Presence and Reverse Operation System (ROS)

Understanding safety systems for operator presence and reverse operation.

Cutting Tips

Advice for achieving optimal cutting results and maintaining the lawn.

To Dump Bagger

Instructions for emptying the grass bagger.

Driving on Slopes Warning

Critical safety precautions when operating on inclined terrain.

Switching Off the Engine

Engine Shutdown Procedure

Steps for safely shutting down the tractor engine.

6. Maintenance, Adjustment

Pre-Service Procedures

Essential steps before performing any maintenance on the engine or deck.

General Maintenance Tasks

Routine checks and cleaning procedures for the tractor.

To Change Oil

Step-by-step guide for draining and refilling the engine oil.

SERVICE RECORD

Log for recording scheduled maintenance activities.

Air Filter and Screen Cleaning

Procedures for cleaning the air screen and servicing the air filter.

Operator Presence System and Reverse Operation System (ROS)

ROS System Operation and Safety Checks

How to use and check the ROS and operator presence safety systems.

6. Blades

Blade Removal and Installation

Instructions for safely removing, sharpening, and installing mower blades.

To Remove Mower

Mower Deck Removal Procedure

Steps for safely removing the mower deck from the tractor.

Assembly of the cutting unit

Cutting Unit Assembly Steps

Instructions for assembling the mower deck components.

To Replace Mower Drive Belt

Drive Belt Replacement Procedure

Steps for replacing the mower drive belt.

To Level Mower

Side-to-Side Mower Leveling

Adjusting the mower deck for level side-to-side cutting.

Front-to-Back Mower Leveling

Front-to-Back Adjustment Procedure

Adjusting the mower deck for proper front-to-back cutting height.

TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT

Gear Shift Lever Adjustment Procedure

How to adjust the gear shift lever for correct neutral positioning.

To Check Brake

Brake Check Procedure

Steps to check the tractor's brake system functionality.

DECK WASHOUT PORT

Deck Washout Procedure

Instructions for using the deck washout port for cleaning.

7. Troubleshooting

Engine Issues

Common problems related to the engine not starting or running unevenly.

Electrical Issues

Troubleshooting battery charging, lighting, and ignition problems.

Machine Operation Issues

Addressing vibration, uneven cutting, and overheating problems.

Engine Not Starting

Specific steps for diagnosing why the engine won't start.

Starter Motor Issues

Troubleshooting when the starter motor does not turn the engine.

Motor Runs Unevenly

Diagnosing and resolving issues causing the engine to run rough.

8. Storage

End of Season Storage Procedures

Steps for proper cleaning, fuel draining, and storage of the tractor.

EC DECLARATION OF CONFORMITY

EU Directives and Standards Compliance

Details on EU directives, regulations, and harmonized standards the product complies with.

Related product manuals