McCulloch M165-97TC Classic User Manual

M165-97TC CLASSIC
Original Instructions in English, all others are translations.
Instruction manual
Please read these in struc tions care ful ly
and make sure you un der stand them
before using this ma chine.
Manuel d’instructions
Merci de lire trés attentivement le manuel
d'instructions. Assurez-vous d'avoir tout
compris avant d'utiliser ce tracteur.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed
accertatevi di averle comprese bene.
Euro
115 91 19-20 Rev. 1
Bedienungsanleitung
Lesen Sie diese Anweisungen sorgfältig
durch und machen Sie sich mit dem
Inhalt vertraut, bevor Sie diese Maschine
benutzen.
Manual de las instrucciones
Por favor lea cuidadosamente y
comprenda estas intrucciones an tes
de usar esta maquina.
Instructieboekje
Lees deze instructies aandachtig en zorg
dat u ze begrijpt voordat u deze ma chine
gebruikt.

McCulloch M165-97TC Classic Specifications

General

Engine	Briggs & Stratton
Fuel tank volume	3.6 L
Transmission Type	Manual
Cutting Width	97 cm
Cutting Height Steps	6
Blade Engagement	Manual
Collector Volume	50 L
Engine Type	4-stroke
Fuel Type	Petrol
Tire size, front	15x6-6
Tire size, rear	18x8.5-8

Summary

Safety Rules

I. Operator Training and Awareness

Emphasizes operator training and understanding of manual instructions.

II. Pre-Operation Preparation and Safety

Pre-operation checks and precautions to reduce fire hazards and ensure safety.

III. Safe Operation Practices

Guidelines for safe operation, including slope management and hazard avoidance.

IV. Maintenance and Storage Safety Precautions

Safety guidelines for maintaining and storing the machine, including warnings.

Product Specifications

Technical Data and Certifications

Before Starting and Operation

Fueling and Fluid Checks

Starting and Driving Procedures

Maintenance and Adjustment

Component Maintenance and Replacement

Drive System and Mower Deck Adjustment

Troubleshooting

Engine Starting Problems

Common causes and solutions for engine starting failures.

Engine Running Issues

Diagnosing and resolving problems like rough running, weak power, or overheating.

Electrical System Problems

Troubleshooting battery charging and lighting system failures.

Cutting Performance Issues