To Next PageTo Next Page
Need help?Do you have a question about the McCulloch M185-107TC POWERDRIVE and is the answer not in the manual?
General| Cutting Width | 107 cm |
|---|---|
| Weight | 238 kg |
| Transmission Type | Hydrostatic |
| Blades | 2 |
| Engine Type | 4-stroke |
| Transmission | Hydrostatic |
| Engine | Briggs & Stratton |
| Fuel Type | Petrol |
| Tire Size (Front) | 15x6-6" |
Read instructions carefully and become familiar with controls and proper use of equipment.
Reduce risk of fire by inspecting and removing debris before use, refueling, and after mowing.
Follow safe operating practices, avoid hazardous conditions, and use caution on slopes and when maneuvering.
Keep equipment in safe working condition and store properly to prevent hazards.
Certain parts must be assembled before use, as they are enclosed in the packing for transportation.
Instructions for mounting the steering wheel, including the extension shaft and related components.
Steps to install the steering extension shaft onto the steering wheel and tractor.
Instructions for installing the tractor seat, connecting wiring harness, and securing it properly.
Guide on how to adjust the tractor seat for optimal operator comfort and position.
Step-by-step guide for safely installing the tractor battery, including important warnings and cautions.
How to adjust gauge wheels for proper deck height and to prevent scalping.
Instructions for unfolding, disassembling old parts, and assembling the new bagger assembly.
Steps to attach the bagger support assembly, including mid brackets and pivots, to the tractor frame.
Instructions for adjusting the bagger assembly horizontally and vertically for proper fit and alignment.
How to install the bagger spring latches onto the back plate to secure the bagger.
Procedures for installing the bagger full lever and extension, including removing the discharge chute.
How to adjust the bagger full lever extension for different grass conditions.
Identifies and explains the location and function of various controls on the tractor.
Explains how the throttle control regulates engine speed and blade rotation for optimal cutting.
Details the function of the brake pedal for stopping the tractor and starting the engine.
Explains how to control the tractor's direction and speed using the drive pedals.
How to engage and disengage the cutting unit drive, including safety features.
Instructions for quickly raising or lowering the cutting unit for transport or passing over obstacles.
Explains the different positions of the ignition key and important safety warnings.
Step-by-step instructions on how to engage and disengage the parking brake for secure tractor operation.
How to use the free-wheel control lever for towing or driving the tractor.
Instructions on how to use the choke control for cold starting the engine.
Instructions for safely refilling the fuel tank, including fuel type, quantity, and important safety precautions.
How to check the engine oil level, including proper procedure and capacity information.
Importance of checking tire pressure and ensuring proper inflation for optimal operation.
Step-by-step guide on how to safely start the tractor engine, including pre-start checks and safety features.
Instructions on how to use the choke control for cold starting the engine.
How to adjust the throttle for different engine speeds and cutting conditions.
Specific instructions for starting the engine in cold weather conditions, including warming up the transmission.
How to control tractor direction and speed using the drive pedals.
Steps for lowering the cutting unit and selecting appropriate speed for cutting.
Explains the Reverse Operation System (ROS) and safety precautions when using it.
Advice on how to achieve optimal cutting results, including lawn preparation and technique.
Instructions for emptying the grass bagger, including operating the dump alarm and handle.
Safety warnings and precautions for driving the tractor on slopes exceeding 15 degrees.
Procedures for safely shutting down the tractor engine, including disengaging the clutch and turning off the ignition.
Steps to convert the mower for mulching, including removing the bagger and installing the mulch plug.
Instructions to convert the mower for rear discharge, involving installing the discharge chute.
Steps to attach the bagger to the tractor for collecting grass clippings.
Essential steps to follow before performing maintenance or adjustments on the engine or cutting unit.
Instructions for raising, lowering, and reconnecting the engine hood and headlight wire connector.
List of essential checks to perform before each use to ensure proper tractor operation.
Recommended methods and precautions for cleaning the tractor and its components.
Step-by-step guide for changing the engine oil, including required tools and safety precautions.
Log for recording dates of completed maintenance and service tasks according to schedule.
How to clean the air screen and service the air filter for optimal engine performance.
Important instructions for maintaining mower blades, including sharpening and balancing.
Detailed steps for removing and installing mower blades, including specific types and torque specifications.
Procedure to check if the tractor's brakes are functioning correctly, especially at higher speeds.
Step-by-step instructions for safely removing the mower deck from the tractor.
Instructions for installing the mower deck onto the tractor, in reverse order of removal.
Detailed instructions for removing and installing the mower drive belt, including proper routing and tension.
Comprehensive guide to leveling the mower deck side-to-side and front-to-back for optimal cutting performance.
