EasyManua.ls Logo

McCulloch M155-107HRB User Manual

McCulloch M155-107HRB
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
532 44 70-59 Rev. 2
Instruction manual
Please read these in struc tions care ful ly
and make sure you un der stand them before
using this ma chine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorgfältig
durch und vergewissern Sie sich, daß Sie
diese verstehen, bevor Sie die Maschine
in Betrieb nehmen.
Manuel d’instructions
Merci de lire trés attentivement le manuel
d'instructions. Assurez-vous d'avoir tout
compris avant d'utiliser ce tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y comp-
renda estas intrucciones an tes de usar
esta maquina.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en zorg
dat u ze begrijpt voordat u deze ma chine
gebruikt.
M155-107HRB
Question and Answer IconNeed help?

Do you have a question about the McCulloch M155-107HRB and is the answer not in the manual?

McCulloch M155-107HRB Specifications

General IconGeneral
Cutting Width107 cm
Drive TypeHydrostatic
Grass Collector Volume320 L
Weight232 kg
Engine ManufacturerBriggs & Stratton
Grass Collector Capacity320 L
Wheel SizeFront: 15 inches, Rear: 18 inches

Summary

1. Safety Rules

I. TRAINING

Learn and understand controls and proper use of the equipment.

III. OPERATION

Guidelines for safe operation, including slope, speed, and general usage rules.

IV. MAINTENANCE AND STORAGE

Keep equipment in good condition and store it properly to prevent hazards.

2. Assembly

Install Battery

Battery Installation Procedure

Steps for safely installing the tractor battery, including precautions.

3. Functional description

Motion control lever

Explanation of the four positions (N, S, F, R) and stepless adjustment of the motion control lever.

Connection/disconnection of the cutting unit

How to engage and disengage the cutting unit, and safety features.

Ignition Lock Positions

Explanation of the four ignition key positions: OFF, ROS ON, ON, START.

Parking Brake Operation

Steps to engage and disengage the parking brake.

4. Before starting

Filling up

Instructions for safely filling the fuel tank with unleaded petrol.

Oil level

How to check and maintain the engine oil level.

5. Driving

Starting of motor

Procedure for starting the engine, including safety checks and pedal operations.

Ignition Key Operation

Correct sequence for using the ignition key to start and run the engine.

Driving Operations

How to lower cutting unit, engage it, and select driving speed.

Reverse Operation System (ROS)

Explanation of the ROS system and how to use it safely.

IMPORTANT! COLD STARTING FOR HYDRO

Purge Transmission

Steps to purge the transmission fluid for proper operation.

To Dump Bagger

WARNING! Driving on Slopes

Slope Operation Safety

Critical safety instructions for operating the tractor on slopes.

Switching off the engine

Engine Shutdown Procedure

Steps for safely shutting off the engine and removing the ignition key.

6. Maintenance, Adjustment

Before Servicing

Essential safety steps to perform before any engine or cutting unit maintenance.

6. Maintenance

To Change Oil

Step-by-step instructions for changing the engine oil, including safety precautions.

6. Operator Presence System and Reverse Operation System (ROS)

Checking Operator Presence System

Verify that the operator presence system functions correctly.

Checking Reverse Operation System (ROS)

Verify that the ROS functions correctly for safe reverse operation.

Blades and Blade Care

To Check Brake

Brake Check Procedure

Steps to check the tractor's brake system for proper function.

To Remove Mower

To Replace Mower Drive Belt

To Level Mower

Front-to-Back Adjustment

Adjusting mower deck front-to-back for optimal cut.

Longitudinal Adjustment

How to adjust mower deck front-to-back for correct cutting height.

To Replace Motion Drive Belt

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT

Transaxle Neutral Adjustment

Procedure to adjust the transaxle motion control lever to neutral.

7. Troubleshooting

Engine Will Not Start

Common issues and solutions when the engine fails to start.

Start Motor Will Not Turn Engine

Troubleshooting steps if the starter motor does not engage.

Motor de Arranque No Gira

Troubleshooting if the starter motor does not turn the engine.

8. Storage

End of Season Service

Steps to prepare the machine for storage after the mowing season.

End of Season Procedures (Italian)

Steps for winter storage and machine preparation in Italian.

End of Season Procedures (Dutch)

Steps for winter storage and machine preparation in Dutch.

Related product manuals