Do you have a question about the McCulloch mac 338 and is the answer not in the manual?
All repairs, adjustments and maintenance not described in the Operator's Manual must be performed by qualified service personnel.
Includes front handle, screws, and chain catcher for saw assembly.
Components for the cutting bar, chain, and spike assembly.
Parts related to the oil cap, vent, and oil pump assembly.
Includes flywheel, starter pulley, fan housing, and starter handle.
Parts for the fuel cap, fuel line, carburetor, and air box.
Components of the clutch drum, clutch, and chain brake.
Includes chassis, isolator parts, springs, and throttle lockout.
Parts list for the cylinder, muffler, and related fittings.
Includes carburetor adapter, air box, and foam air filter.
Components for the piston, piston pin, and spark plug.
Contains engine gasket kit and bar wrench.
Information on an isolator spring and screw that may or may not be present on the unit.
All repairs, adjustments and maintenance not described in the Operator's Manual must be performed by qualified service personnel.
Includes front handle, screws, and chain catcher for saw assembly.
Components for the cutting bar, chain, and spike assembly.
Parts related to the oil cap, vent, and oil pump assembly.
Includes flywheel, starter pulley, fan housing, and starter handle.
Parts for the fuel cap, fuel line, carburetor, and air box.
Components of the clutch drum, clutch, and chain brake.
Includes chassis, isolator parts, springs, and throttle lockout.
Parts list for the cylinder, muffler, and related fittings.
Includes carburetor adapter, air box, and foam air filter.
Components for the piston, piston pin, and spark plug.
Contains engine gasket kit and bar wrench.
Information on an isolator spring and screw that may or may not be present on the unit.
| Engine Type | 2-stroke |
|---|---|
| Displacement | 38 cm³ |
| Power Output | 1.3 kW |
| Bar Length | 14 in (35 cm) |
| Weight | 4.7 kg (without bar and chain) |
| Fuel Tank Capacity | 0.3 l |
| Oil Tank Capacity | 200 ml |












Loading...