McCulloch MS1435 User Manual

¤
U.S.A. Imported by:
MTD LLC
P.O. Box 361131
Cleveland, OH 44136-0019
Canada Imported by / Importé par:
MTD PRODUCTS LIMITED
97 Kent Avenue
Kitchener, ON
CANADA N2G 4J1
Made in Taiwan / Fabriquè à Taiwan / Hecho en Taiwan
STOP
ARRÊT
ALTO
For problems or questions, DO NOT return
this product to the store. Contact your
Customer Service Agent .
En cas de problèmes ou pour des questions,
NE PAS retourner ce produit au point de vente. S'adresser
au préposé du Service à la clientèle en composant.
Para problemas o preguntas, NO devolver este producto a la tienda
Contacte a su Agente de Servicio al Cliente.
U.S.A. 1-866-747-9816
CANADA 1-800-668-1238
For Consumer Assistance Please Call
L'Aide Du Consommateur Necessitez S'il Vous Plait
Para La Ayuda Del Consumidor Llame Por Favor
PN 9096-310129 © 2001 McCulloch Motors • Printed in Taiwan
USER MANUAL Gasoline Chain Saws
MANUEL DE UTILISATION Tronçonneuses à essence
MANUAL DEL USUARIO Sierras de Cadena de Gasolina
WARNING • PLEASE READ
Beware of kickback. Hold chain saw firmly with both hands when using. For your own safety, please read and follow the safe-
ty precautions in this manual before attempting to operate your chain saw. Improper use can cause serious injury.
¤
SAFETY
OPERATION
MAINTENANCE
SECURITE
FONCTIONNEMENT
ENTRETIEN
SEGURIDAD
OPERACION
MANTENIMIENTO
AVERTISSEMENT • LIRE ATTENTIVEMENT
Attention aux rebonds. Tenez toujours la tronçonneuse fermement et des deux mains. Pour votre propre sécurité, veuillez lire
attentivement ce manuel et suivre toutes les measures de précautions indiquées avant de vous servir de la tronçonneuse.
Utilisé incorrectement, cet outil peut causer des dommages matérials et/ou corporels graves.
ADVERTENCIA • FAVOR DE LEER
Cuidese del contragolpe. Sostenga la sierra-de-cadena firmemente con ambas monos cuando la esté usando. Por su propia
seguridad, por favor lea y siga las precauciones de seguridad en este manual antes de intentar operar su sierra-de-cadena.
Uso impropio puede causar serias lesiones.
This product has been tested at a computed kickback angle (CKA) of no greater than 23.4 degrees.
On a testé ce produit à un angle de rebond calculé (CKA) de moins de 23,4 degrés.
Este producto ha sido probado a un ángulo de contragolpe calculado (CKA) no mayor del 23.4 grados.
Models : MS1432, MS1435, MS1635, MS1635AV, MS1838AV,
MacCat Super 16 AV
23.4°
CKA

McCulloch MS1435 Specifications

General

Brand	McCulloch
Model	MS1435
Category	Chainsaw
Language	English

Summary

General Information

General Identification

Identifies the main components of the chainsaw.

Safety Features

Lists and explains the built-in safety features of the chainsaw.

Safety Precautions

Kickback Safety Precautions

Explains kickback hazards and provides methods to prevent them.

Other Safety Precautions

Covers general safety rules and best practices for operating the chainsaw.

More About Kickback

Provides detailed explanations of kickback types and associated dangers.

Kickback Safety Labels

Explains the meaning and importance of safety labels related to kickback.

Assembly Instructions

Tools for Assembly

Lists the necessary tools required for assembling the chainsaw.

Assembly Requirements

Outlines essential steps and requirements before operating the chainsaw.

Guide Bar / Saw Chain / Clutch Cover Installation

Details the procedure for installing the guide bar, saw chain, and clutch cover.

Saw Chain Tension Adjustment

Explains how to properly adjust the saw chain tension for safe operation.

Chain Brake® Mechanical Test

Describes the steps to test the functionality of the chain brake system.

Fuel and Lubrication

Fuel

Specifies the correct type of fuel and mixing ratios for the chainsaw engine.

Mixing Fuel

Provides instructions on how to correctly mix fuel and oil for the engine.

Recommended Fuels

Discusses acceptable fuel types, including oxygenated gasolines.

Chain and Bar Lubrication

Explains the importance and procedure for lubricating the saw chain and bar.

Operating Instructions

Engine Pre-Start Checks

Lists essential checks to perform before starting the chainsaw engine.

To Start Engine

Step-by-step guide on how to start the chainsaw engine correctly.

Re-starting a Warm Engine

Instructions for restarting a chainsaw engine that has been recently used.

To Stop Engine

Details the procedure for safely stopping the chainsaw engine.

Chain Brake® Operational Test

Describes how to test the functionality of the chain brake system.

Saw Chain / Bar Lubrication

Emphasizes the necessity of lubricating the saw chain and bar for proper operation.

Automatic Oiler

Explains the function of the automatic oiler system.

General Cutting Instructions

Felling

Explains the process and safety precautions for felling trees.

Limbing

Describes the process of removing branches from a fallen tree.

Bucking

Explains how to cut a fallen log into desired lengths.

Bucking Using a Sawhorse

Provides instructions for safe and effective bucking using a sawhorse.

Maintenance Instructions

Preventive Maintenance

Outlines a regular inspection and care program for the chainsaw.

Air Filter

Instructions for cleaning and maintaining the chainsaw's air filter.

Fuel Filter

Details the procedure for inspecting and replacing the fuel filter.

Spark Arrester Screen

Explains how to clean or replace the spark arrester screen.

Spark Plug

Instructions for cleaning, gapping, or replacing the spark plug.

Carburetor Adjustment

Explains carburetor adjustment procedures and when to seek professional service.

Storing a Chain Saw

Provides guidelines for storing the chainsaw for extended periods.

Bar / Chain Maintenance

Guide Bar Maintenance

Details procedures for maintaining the guide bar for optimal performance.

Chain Maintenance

Covers chain tension adjustment and break-in procedures.

Bar and Chain Replacement Combinations

Lists compatible bar and chain part numbers for replacement.

Troubleshooting the Engine