McCulloch MS1635 User Manual

¤
U.S.A. Imported by:
MTD LLC
P.O. Box 361131
Cleveland, OH 44136-0019
Canada Imported by / Importé par:
MTD PRODUCTS LIMITED
97 Kent Avenue
Kitchener, ON
CANADA N2G 4J1
Made in Taiwan / Fabriquè à Taiwan / Hecho en Taiwan
STOP
ARRÊT
ALTO
For problems or questions, DO NOT return
this product to the store. Contact your
Customer Service Agent .
En cas de problèmes ou pour des questions,
NE PAS retourner ce produit au point de vente. S'adresser
au préposé du Service à la clientèle en composant.
Para problemas o preguntas, NO devolver este producto a la tienda
Contacte a su Agente de Servicio al Cliente.
U.S.A. 1-866-747-9816
CANADA 1-800-668-1238
For Consumer Assistance Please Call
L'Aide Du Consommateur Necessitez S'il Vous Plait
Para La Ayuda Del Consumidor Llame Por Favor
PN 9096-310129 © 2001 McCulloch Motors • Printed in Taiwan
USER MANUAL Gasoline Chain Saws
MANUEL DE UTILISATION Tronçonneuses à essence
MANUAL DEL USUARIO Sierras de Cadena de Gasolina
WARNING • PLEASE READ
Beware of kickback. Hold chain saw firmly with both hands when using. For your own safety, please read and follow the safe-
ty precautions in this manual before attempting to operate your chain saw. Improper use can cause serious injury.
¤
SAFETY
OPERATION
MAINTENANCE
SECURITE
FONCTIONNEMENT
ENTRETIEN
SEGURIDAD
OPERACION
MANTENIMIENTO
AVERTISSEMENT • LIRE ATTENTIVEMENT
Attention aux rebonds. Tenez toujours la tronçonneuse fermement et des deux mains. Pour votre propre sécurité, veuillez lire
attentivement ce manuel et suivre toutes les measures de précautions indiquées avant de vous servir de la tronçonneuse.
Utilisé incorrectement, cet outil peut causer des dommages matérials et/ou corporels graves.
ADVERTENCIA • FAVOR DE LEER
Cuidese del contragolpe. Sostenga la sierra-de-cadena firmemente con ambas monos cuando la esté usando. Por su propia
seguridad, por favor lea y siga las precauciones de seguridad en este manual antes de intentar operar su sierra-de-cadena.
Uso impropio puede causar serias lesiones.
This product has been tested at a computed kickback angle (CKA) of no greater than 23.4 degrees.
On a testé ce produit à un angle de rebond calculé (CKA) de moins de 23,4 degrés.
Este producto ha sido probado a un ángulo de contragolpe calculado (CKA) no mayor del 23.4 grados.
Models : MS1432, MS1435, MS1635, MS1635AV, MS1838AV,
MacCat Super 16 AV
23.4°
CKA

McCulloch MS1635 Specifications

General

Power source	Gasoline
Bar length	16 inches
Engine Power	1.5 kW
Displacement	35 cc
Weight	4.6 kg
Oil Tank Capacity	0.15 liters

Summary

PLEASE READ

WARNING / CAUTION

Identifies procedures that could cause serious injury or damage if not followed.

1 - GENERAL INFORMATION

1-1. GENERAL IDENTIFICATION

Identifies the main parts of the chainsaw with numbered labels.

1-2. SAFETY FEATURES

2 - SAFETY PRECAUTIONS

2-1. KICKBACK SAFETY PRECAUTIONS

Crucial warnings and procedures to prevent dangerous kickback incidents.

2-2. OTHER SAFETY PRECAUTIONS

Additional safety measures for operation, handling fuel, and personal protection.

2-3. MORE ABOUT KICKBACK

2-4. KICKBACK SAFETY LABELS

HOW TO READ SYMBOLS AND COLORS

3 - ASSEMBLY INSTRUCTIONS

3-1. TOOLS FOR ASSEMBLY

Lists the necessary tools required to assemble the chainsaw.

3-2. ASSEMBLY REQUIREMENTS

Specifies pre-operation checks and preparations needed before starting the unit.

3-3. GUIDE BAR / SAW CHAIN / CLUTCH COVER INSTALLATION

Detailed instructions for installing the guide bar, saw chain, and clutch cover correctly.

3-4. SAW CHAIN TENSION ADJUSTMENT

3-5. CHAIN BRAKE® MECHANICAL TEST

4 - FUEL AND LUBRICATION

4-1. FUEL

Specifies the type of gasoline and oil mixture required for optimal engine performance.

4-2. MIXING FUEL

Instructions on how to correctly mix fuel and oil for the chainsaw engine.

4-4. FUEL MIXING TABLE

Provides a table with specific quantities for mixing fuel and oil.

4-5. RECOMMENDED FUELS

Details acceptable types of gasoline, including oxygenated blends.

4-6. CHAIN AND BAR LUBRICATION

Essential instructions for lubricating the saw chain and guide bar.

5 - OPERATING INSTRUCTIONS

5-1. ENGINE PRE-START CHECKS

Critical checks to perform before starting the engine to ensure safe operation.

5-2. TO START ENGINE

Step-by-step instructions for starting the chainsaw engine correctly.

5-3. RE-STARTING A WARM ENGINE

Procedure for restarting the engine after it has been running.

5-4. TO STOP ENGINE

Instructions on how to properly shut down the chainsaw engine.

5-5. CHAIN BRAKE® OPERATIONAL TEST

Procedure to test the safety chain brake system for proper function.

5-6. SAW CHAIN / BAR LUBRICATION

Details the importance and method of lubricating the saw chain and guide bar.

5-7. AUTOMATIC OILER

Explains the function and operation of the automatic oiling system.

6 - GENERAL CUTTING INSTRUCTIONS

6-1. FELLING

Instructions and safety precautions for cutting down trees.

6-2. LIMBING

Process of removing branches from a fallen tree.

6-3. BUCKING

Cutting a fallen log into manageable lengths.

6-4. BUCKING USING A SAWHORSE

Specific technique for safe and efficient bucking using a sawhorse.

7 - MAINTENANCE INSTRUCTIONS

7-1. PREVENTIVE MAINTENANCE

Outlines a checklist for routine maintenance tasks on the chainsaw.

7-2. AIR FILTER

Instructions for cleaning or replacing the air filter to maintain engine performance.

7-3. FUEL FILTER

Procedure for replacing the fuel filter to ensure proper fuel delivery.

7-4. SPARK ARRESTER SCREEN

Steps for cleaning or replacing the spark arrester screen.

7-5. SPARK PLUG

Guide for cleaning, gapping, or replacing the spark plug.

7-6. CARBURETOR ADJUSTMENT

Information on carburetor adjustment, recommending factory settings or service center.

7-7. STORING A CHAIN SAW

Procedures for safely storing the chainsaw for extended periods.

7-8. REMOVING A UNIT FROM STORAGE

Steps to prepare the chainsaw for use after it has been stored.

8 - BAR / CHAIN MAINTENANCE

8-1. GUIDE BAR MAINTENANCE

Focuses on lubricating the guide bar sprocket tip for optimal performance.

8-2. CHAIN MAINTENANCE

Covers chain tension adjustment and break-in procedures.

8-3. BAR AND CHAIN REPLACEMENT COMBINATIONS

Lists compatible bar and chain part numbers for replacement.

9 - TROUBLESHOOTING THE ENGINE