To Next Page
J
Joseph EstesAug 11, 2025
What to do if my McCulloch MS354 Chainsaw engine hesitates?
- RRick HenryAug 11, 2025
If your McCulloch Chainsaw engine hesitates, clean, gap, or replace the plug.
What to do if my McCulloch MS354 Chainsaw engine hesitates?
If your McCulloch Chainsaw engine hesitates, clean, gap, or replace the plug.
Why does my McCulloch MS354 have no power under load?
If your McCulloch Chainsaw has no power under load, the fuel filter might be plugged. Replace the fuel filter.
What to do if my McCulloch MS354 runs erratically?
If your McCulloch Chainsaw runs erratically, the choke lever position might be incorrect. Move it to the RUN position.
Why is my McCulloch MS354 smoking excessively?
If your McCulloch Chainsaw smokes excessively, a dirty spark arrester screen could be the cause. Replace the spark arrester screen.
Why does my McCulloch MS354 Chainsaw start but have low power?
If your McCulloch Chainsaw starts but the engine has low power, the carburetor mixture adjustment setting might be incorrect. Have the carburetor adjusted by an Authorized Service Center.
General