TO PREVENT ELECTRIC
SHOCKAND DEATH
FROM INCORRECT
GROUNDING WIRE CONNECTION:
Check
with
a
qualified
electrician
if
you
are
in
doubt as to whether
the outlet is
properly grounded.
Do not modify the
power
cord
plug provided
with
the compressor.
Never remove the
grounding
prong
from the
plug.
Do not use the compressor if
the
power
cord or
plug
is damaged. lf damaged, have it repaired by a service facility before use. lf
the
plug
will
not fit the outlet,
have
a
proper
outlet
installed
by a
qualified
electrician.
110-120 VAC
Grounded Compressors:
Compressors with Three Prong Plugs
5.
6.
1. ln the
event
of a malfunction or breakdown,
grounding provides
a
path
of
least resistance for
electric current to reduce the
risk
of electric shock.
This compressor is equipped
with
an electric
cord having an equipment-grounding conductor
and a
grounding plug.
The
plug
must be
plugged
into a matching outlet that
is
properly
installed
and
grounded
in
accordance
with all local codes and ordinances.
Do not modify the
plug provided
-
if it
will
not fit
the outlet,
have the
proper
outlet installed by a
qualified
electrician.
lmproper
connection
of the equipment-grounding
conductor
can
result in a risk of electric shock.
The conductor with insulation
having
an outer
surface that is
green
with or
without
yellow
stripes
is the
equipment-grounding
conductor.
lf repair or replacement of the electric cord or
plug
is necessary, do not connect the equipment-
grounding
conductor
to
a
live terminal.
Check
with
a
qualified
electrician or service
personnel
if the
grounding
instructions are
not
completely
understood, or
if in
doubt as
to
whether
the compressor
is
properly grounded.
Use only
3-wire extension cords that have
3-prong
grounding plugs
and 3-pole receptacles
that accept the
compressor's
plug.
Repair
or replace
damaged or
worn cord immediately.
Grounding
Pin
125 VAC
3-Prong
Plug
and Outlet
(for
up to
125 VAC
and up to 15 A)
This
compressor is intended for
use on a
circuit that has an outlet that looks like the
one
illustrated above in 125 VAC
3-Prong
Plug
and Outlet. The compressor has
a
grounding
plug
that looks like the
plug
illustrated
above
in 125
VAC 3-Prong Plug and Outlet.
The
outlet
must
be
properly
installed
and
grounded
in
accordance
with
all codes and ordinances.
Do not use an adapter to connect this
compressor to a different outlet.
2.
3.
7.
4.
8.
9.
Symbology
@
o
@
PSI
Pounds
per
square
inch of
pressure
CFM
Cubic
Feet
per
Minute flow
SCFM
Cubic
Feet
per
Minute flow
at standard conditions
NPT
National
pipe
thread, tapered
NPS
National
pipe
thread, straight
E
Double lnsulated
V
Volts
-
Alternating
Current
A
Amperes
To Next Page
Loading...
