McGraw 57567 - Air Connection Setup; Breaking in the Compressor

Breaking in
the Compressor
6.
7.
8.
1.
2.
3.
4.
5.
Turn Power
Switch OFF and unplug Power Cord.
Fully
open
Regulator.
Fully
open Drain
Valve.
Plug in Power
Cord.
Turn Power
Switch ON.
Let unit run for
15 minutes. Air will
expel freely
through the
Drain Valve.
Turn
Power
Switch OFF.
Unplug Power
Cord and close Drain Valve.
Air
Connection Setup
1.
Connect
114' air hose with lndustrial
(M-style)
plug
2. Consult
air
tool's manual for needed
accessories.
(sold
separately) to the Air Outlet.
The
air
hose must
be long
enough
to reach the work area
with
enough
extra length to allow free movement
while working.