EasyManua.ls Logo

McGraw MG2HPSS - Oil and Air Filter Care

McGraw MG2HPSS
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 12 I(+)/,F7.1F5:)J2,0/1(.0K)*:,50,)F5::)LM===M=NNM<O?OD Item 58494
P"IG'Q R"%$'G$"$SG T"#'P)U%P'%$P'"UU"'%V$
V1:)R51./,.5.F,
Check the oil periodically for clarity. Replace oil if it appears milky or if debris is present,
or every 6 months, or 100 operation hours, whichever comes first.
Replace the oil more frequently if compressor is used in harsh environments such as high heat or high humidity.
S"\'%V$i))'V)T#G@G$')%$f\#Q)I#VR)W\#$P;)
"::(A)"1+)S(9*+,00(+)/()F((:)B,8(+,)F75.E1.E)/7,)(1:D
1. Place a container under the Oil Drain Plug.
2. Remove the Oil Fill Plug to allow
air flow into the Pump.
3. Remove the Oil Drain Plug, allowing
the oil to drain into the container.
4. When the oil is completely drained from the Pump,
replace the Oil Drain Plug.
5. Fill the Pump with new synthetic, non-
detergent air compressor oil to the FULL
level on the Oil Sight Glass (21).
6. Replace and tighten the Oil Fill Plug.
7. Discard the old oil according to local,
state and federal regulations.
"1+)I1:/,+)R51./,.5.F,
Check the Air Filter weekly to see if it needs replacement.
Replace the filter more often if compressor is used in dirty environments.
1. Remove Filter Front Cover.
2. Remove the Air Filter.
3. Replace with a new Air Filter.
4. Replace the Cover.