McGREGOR MEC18352 - Step 3 Check Chain Tension; Step 4 Settle Power Cord

17Customer Helpline 0333 300 1614
Step 3 Check the chain tension
Prepare
NOTE:Always check the chain tension before use.
Hook the mains cable through the cable strain-release to reduce the strain on the cable
fitting as your work.
After the first cuts and regularly during use,approx.every 10 minutes.
The lowest cutters should be undermeath the bar solidly and contact the bar.If not,adjust the
chain with protection glovers.(Please refer to the detailed info.in later chapter “Adjust the
chain tension”)
INCORRECT
CORRECT
Step 4 Settle the power cord