Need help?Do you have a question about the McIntosh Mac 1700 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Frequency Response | 20Hz to 20kHz |
| Total Harmonic Distortion | 0.5% |
| Tuning Range | FM, AM |
| Inputs | Phono, Aux, Tape |
| Input Sensitivity | 250mV (aux) |
| Speaker Load Impedance | 4 ohms |
| Power Output | 40 watts per channel (8 ohms) |
| Signal to Noise Ratio | 70dB (phono), 85dB (aux) |
Details the professional stereo preamplifier and its bass/treble controls, loudness, and filter functions.
Explains the 40-watt power output, distortion levels, and McIntosh's performance standards.
Lists specifications for the FM tuner section, including sensitivity, noise ratio, and distortion.
Details amplifier specifications like power output, distortion, frequency response, and impedance.
Lists special features like automatic stereo switching, muting, and input options.
Covers semiconductor complement, power requirements, and mechanical details.
Identifies major controls and indicators on the front panel with labels.
Specifies minimum internal dimensions and ventilation needs for cabinet installation.
Outlines the process for installing the unit into a cabinet cutout from the front.
Guides on connecting record players and tape devices to various inputs.
Explains connections for tape players and recorders, including TAPE HD and TAPE MON.
Details connecting speakers and FM antennas to the rear panel.
Describes the controlled and always-on AC outlets for accessories.
Describes the tuning dial scales, tuning meter, and stereo indicator functions.
Explains the operation of volume, bass, and treble controls.
Guides on how to set controls and adjust speaker phase for optimal stereo sound.
Explains how to adjust the balance control for unequal loudness between channels.
Instructions for listening to stereo and monophonic records via PHONO inputs.
How to listen to tape decks and stereo tape recorders using different inputs.
How to monitor recordings using a three-head tape recorder with monitor capabilities.
Details the free factory service contract offer and its terms.
To Next Page
