13
How to use the Remote Control
How to use the Remote Control
The supplied Remote Control performs the various
Operating Functions for the McAire Integrated Audio
System.
Note: Refer to the “How to Operate” Section of this
manual for additional information.
Input Source Selection
Press the Push-button → to select the desired program
source.
Volume
Press the + or - Push-buttons to increase or de-
crease the listening level.
Mute
Press the (Mute) Push-button to mute the audio.
The White LED indicator to the left of the Front Panel
VOLUME Control will flash during the time audio is
muted. Press the MUTE Push-button a second time to
resume listening.
Pause
Press the PAUSE Push-button to temporarily stop
playback of the music.
Back and Next
Press the : (Next) Push-button to move forward one
track or the 9 (Back) Push-button to move back
to the beginning of the current track playing. Press
and hold either Push-button to rapidly skip tracks.
When an optional McIntosh Tuner is connected to the
McAire, the 9 and : Push-buttons allow stepping
thru Station Presets.
Note: If the 9 Push-button is pressed during playback
of the first three seconds of the track, the McAire
will start playing back the previous track from the
beginning.
To Next Page
Loading...