9
Rear Panel Connections
PWR CTRL (Power Control) OUTput sends
a turn-on signal to a McIntosh Component
when the McAire is On
Connect the McAire power cord to a live AC
outlet. Refer to information on the back panel of
your McAire to determine the correct voltage for
your unit
AUX AUDIO INput accepts high
level program source signals
WLAN (Wireless Local Area Network) ANTENNA
for receiving AirPlay and WiFi signals
NETWORK Connector for connecting the
McAire to a Broadband Ethernet Network
iPOD/USB input for wired connnection
to an iPod or iPhone mobile device
AUX DATA OUT sends control signals to a compatible
source component allowing remote control operation
RESET restores the McAire
to factory default settings
MAC ADDRESS is the unique Network
Identification Number for this McAire unit
To Next Page
Loading...