Output Level Adjust:
own master volume control.
volume control.
Input Settings:
On / Rename: The selected input will be function-
menu to rename the input*.
O: The selected input will be deactivated and
will no longer be selectable from the main display
*Renaming inputs: While in the selected input’s
-
select which character you want to change and use
HDMI CEC Settings:
ON: Allows compatible devices to use CEC
(Consumer Electronics Control) to control certain
functions of the MDA200.
OFF: Prevents MDA200 from being controlled w/
CEC.
ON: Allows compatible devices to use CEC (Con-
OFF: Prevents devices from using CEC to power
MDA200.
HDMI Lip Sync Mode Settings:
Auto: The MDA200 will automatically synchro-
Manual: Disables auto video/audio synchroni-
-
ally calibrate audio/video sync from connected
devices.
Digital Gain Settings:
Setup Menu Settings (continued)
Data Port Settings:
All Data: Devices connected to the data port will
receive the same data from the remote control.
[ input name ]: Dedicate the data port to a spe-
received from that input when it receives com-
mands from the remote control.
RS232 Baud Rate Setup:
The settings for serial communications are:
The speed at which the MDA200 communicates
It is recommended to leave this at the highest
To Next Page
Loading...
