PAGE 68
MS300 User’s Manual
Testing the Connection
It is a good idea to verify that your selected network connection is
functioning properly before exiting the Network Connections screen.
Follow these steps to test your selected network connection:
1. Select the TEST CONNECTION button on the Network
Connections screen.
2. Wait for the tests to complete. A check mark next to each test
indicates that it passed while an “X” indicates that the test
failed.
3. Select the RETURN button to return to the previous screen.
If one or more connection tests receive an X, make sure your cables are properly connected and you have properly
setup for Ethernet Settings or Dialup Modem Settings.
USER PREFERENCES
To Next Page
Loading...
