McIntosh MS300

PAGE 88
MS300 User’s Manual
Recording a Range of CDs
If you want to record a specific range of slots in a changer, you can
use the Record Range feature.
Follow these steps to record a range of changer slots:
1. Press the SETUP key on the remote to display the Setup
menu.
2. Select the
CHANGER MANAGEMENT menu.
3. Select the
RECORD DISCS menu.
4. Select the
RECORD RANGE menu.
5. Enter a valid range of slots to record. If you have more than 1
changer, select which changer you want to use.
6. Select the CONTINUE button.
7. The Record Range screen displays the recording progress for
each disc in the selected range.
USER PREFERENCES