To Next PageTo Next Page
Need help?Do you have a question about the McIntosh MVP861 and is the answer not in the manual?
General| Progressive Scan | Yes |
|---|---|
| Type | DVD player |
| Disc Formats | DVD-Video, DVD-Audio, CD, CD-R/RW, SACD |
| Video Output | Component, S-Video, Composite |
| Audio Output | Stereo Analog, Coaxial Digital, Optical Digital, 5.1 Channel Analog |
| Digital Audio Formats Supported | Dolby Digital, DTS, PCM |
| Audio DAC | 24-bit/192kHz |
| Video DAC | 12-bit/216MHz Analog Devices ADV7310 |
Lists factory default settings for various player functions and parameters.
Selects the video signal format for Component Video Jacks (e.g., Progressive, Interlaced).
Selects alternate Progressive Scan modes for enhanced picture quality, especially for dark scenes.
Enters the size of speakers (Large/Small/None) for proper audio processing.
Adjusts individual speaker volume levels for balanced surround sound.
Sets speaker delay times to compensate for varying distances from the listening position.
Sets parental control rating limits for DVD movie playback.
Changes or sets the password for parental control rating adjustments.
Step-by-step guide for inserting discs into the player's tray.
Instructions for starting DVD playback using the play button.
Guide for playing Super Audio CDs and selecting playback layers.
Temporarily stops disc playback and allows single-frame advance for DVDs.
Allows fast scanning of DVD frames forward or backward at varying speeds.
Establishes up to five custom starting points for playback on a disc.
Procedure to reset the player's microprocessors if controls stop functioning.
