EasyManua.ls Logo

McIntosh MVP861

McIntosh MVP861
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
1. Connect a S-Video Cable from the MVP861 S-VIDEO
OUTPUT to the DVD S-VIDEO INPUT on a McIn-
tosh A/V Control Center.
Note: The MVP861 Video Outputs may also be connected
directly to a Monitor/TV if no Video Input
Switching is available in the A/V Control Center.
2. Connect a Video Cable from the MVP861 Composite
VIDEO OUTPUT to the Multizone Controller V-DVD
Video Input. Connect a Video Cable from the
Multizone Controller V-DVD VIDEO OUTPUT to the
A/V Control Center DVD Composite DVD VIDEO
INPUT.
Note: If a McIntosh Multizone Controller is not used,
connect MVP861 Composite VIDEO OUTPUT to
the A/V Control Center DVD Composite DVD
VIDEO INPUT.
3. If you have an Audio/Video Control Center with Com-
ponent Video Inputs, connect it as follows. If the Au-
dio/Video Control Center does not have provisions for
Component Video Switching, proceed to step 4 below.
A. Connect a video cable from the MVP861 Y OUT-
PUT to the Component Video Input of the McIn-
tosh A/V Control Center.
How to Connect Video and AC Power
How to Connect Video and AC Power
B. Connect a video cable from the MVP861 P
B
/C
B
OUTPUT to the P
B
Component Video Input of the
McIntosh A/V Control Center.
C. Connect a video cable from the MVP861 P
R
/C
R
OUTPUT to the P
R
Component Video Input of the
McIntosh A/V Control Center.
4. If you have a TV/Monitor and/or other Video Compo-
nent with Component Video Inputs then connect as fol-
lows:
A. Connect a video cable from the MVP861 Y OUT-
PUT to the Y Component Video Input of the TV/
Monitor or other video component.
B. Connect a video cable from the MVP861 P
B
/C
B
OUTPUT to the P
B
Component Video Input of the
TV/Monitor or other video component.
C. Connect a video cable from the MVP861 P
R
/C
R
OUTPUT to the P
R
Component Video Input of the
TV/Monitor or other video component.
5. Connect the MVP861 power cord to a live AC outlet.
Note: When AC Power is initially applied to the MVP861
the unit will momentarily switch On and then go
into the Standby Mode.
Connect
to AC
Outlet
McIntosh Multizone Controller
McIntosh A/V Control Center
To AC
Outlet

Other manuals for McIntosh MVP861

Related product manuals