
Do you have a question about the McIntosh MX151 and is the answer not in the manual?
Pin configuration for XLR balanced output connectors.
Connectors for power control and trigger signals.
Details of the Ethernet RJ45 socket pinout.
Connectors for Zone A and B sensor signals.
Pin configuration for microphone connector.
Procedures for turning the unit on and off.
How to select desired audio/video sources.
Adjusting the listening volume level.
Understanding front panel LED indicators.
Indicators for audio signal and processing modes.
LEDs indicating surround mode and active channels.
Adjusting audio functions via trim controls.
Switching between RoomPerfect Focus and Global modes.
Selecting equalization curves for audio playback.
Adjusting trim levels for specific speakers.
Adjusting bass and treble tonal response.
Adjusting audio delay to sync with video.
Selecting default and custom surround modes.
Shows operational status on front panel and TV.
Volume compression for reduced listening levels.
Accessing the setup mode for system settings.
Using push-buttons for trim function adjustments.
Activating Zone B control using the front panel.
Activating Zone B control via a remote sensor.
Steps to reset the unit to factory defaults.
Overview of remote PC control via network.
Components needed for PC control.
Steps for connecting the unit to a network.
Using installer menu for output settings.
Setup for bi-amplified systems.
Technical audio performance metrics.
Specs for RoomPerfect and voicing features.
Power, dimensions, and weight information.
Loading...