31
INSTALLER MENU SUB MENU SELECTION OPTION(S) DESCRIPTION SETUP SHEET NO.
Audio Processing Setup
Advanced Audio Setup
RP Bypass No, Yes Bypasses the audio signal around RoomPerfect
Correction; Bypass is available as a Trim Func-
tion and as an option in the User Menu
4
Lipsync 0-400ms Delays the audio signal to be in synchronization
with the video signal
4
HDMI Audio Out Silent, Off, On Silent-mode sends a zero bit audio stream to
the TV/Monitor, Off-mode sends no audio bit
stream, On-passes the source component’s audio
bit stream to the TV/Monitor
4
Mch. AD LFE Gain 0dB, +10dB Affects the Analog Multichannel Sub Input only,
corrects reduction in output level from some
DVD Players
4
Zone B Setup
Power Independent, Follow Zone A Zone B switches On/Off independently or
switches On/Off when Zone A switches On/Off
5
Volume Mode User, Fixed, Wakeup Retains the last volume setting, allows for a
xed volume setting (used to provide an output
for recording purposes), Zone B wakes up to the
same volume setting when switched On
5
Set Volume 0-99% Used to set Zone B Output Level when Zone B
Volume Mode is set to Fixed or Wakeup
5
Video Output Zone B, Independent, Zone A Zone B Input Control select video source, ex-
ternal control (via RS232 connection) can select
a different video source than the selected audio
source, same video source as selected for Zone
A
5
Max volume 0-99% Zone B maximum volume 5
Startup Screen Use last, or any currently
available Input
Allows which input Zone B wakes up to 5
Edit Zone B Sources
Name: a-z, A-Z, 0-9, plus additional
characters
Customize the Input Source Name 5
Video In None, Component 1-5 Zone B component video input source 5
Setup Mode, con’t
To Next Page
Loading...