McIntosh RS200 User Manual

11
INPUT Source Selection
Press this button to select the desired
program source. Each press will
advance to another input.
NIGHT
Toggles the meter lights
and input LEDs on and
off.
Selects Previous Track with
compatible playback sources.
Play/Pause with compatible
playback sources.
Powers the RS200 on or off.
LED illuminates during the
time a remote command is sent
to the RS200.
Mutes and unmutes the audio
Decreases the volume level.
Increases the volume level.
Selects Next Track with
compatible playback sources.
LIP SYNC
These two buttons adjust
HDMI, USB or optically
connected audio up to 150ms
to sync with video.
Descripon of Remote Control Buons
Figure 10– Remote control diagram
Outer ring numbers 1, 2, 3 and 4 can
be used to store and recall Play-Fi
presets.
Play-Fi Presets
Four presets (1, 2, 3, 4) can be stored for one-button
access. Currently, these presets can be Internet Radio,
iHeartRadio, Tidal, Spotify and Pandora but more
services will be added to this new feature.
To store a preset, push and hold the desired number for
5 seconds. A new preset will be stored and any existing
one in that spot will be overwritten. To recall the preset
simply push the button.
Note that the following additional discrete commands
for external control systems are available: POWER
ON, POWER OFF, INPUT (Down), AUX, USB, OPT
(Optical), and HDMI. Contact McIntosh Technical
Assistance or your dealer for more information.

McIntosh RS200 Specifications

General

Brand	McIntosh
Model	RS200
Category	Speaker System
Language	English