To Next PageTo Next PageWhy is there no temperature difference in my McLean Cooling Technology Genesis M36-0616-G307 Air Conditioner?
If the temperature difference between the air entering and exiting the evaporator in your McLean Cooling Technology Air Conditioner is not present, it could be due to a possible loss of refrigerant, in that case you should repair or replace the defective part. It can also be caused by bad valves in the compressor.
Why my McLean Cooling Technology Genesis M36-0616-G307 Air Conditioner unit won’t cool?
If your McLean Cooling Technology Air Conditioner unit won’t cool, several factors could be at play: the impellers/blowers might not be running, the compressor could be inactive, the compressor might have bad valves even when running, or there could be a loss of refrigerant.
What to do if the condenser blower and compressor of my McLean Cooling Technology Genesis M36-0616-G307 don't turn on?
If the condenser blower and compressor of your McLean Cooling Technology Air Conditioner are not turning on when the thermostat is set to the lowest setting, it could be due to a defective thermostat. In this case, consider replacing the part.
Why does my McLean Cooling Technology Genesis M36-0616-G307 Air Conditioner compressor try to start but won’t run?
If your McLean Cooling Technology Air Conditioner compressor tries to start but won’t run, the issue could stem from several causes: low line voltage at start (should be +/-10% rated voltage), a stuck compressor motor, a bad contactor, a faulty overload switch, or a bad run/start capacitor.
How to fix water in my McLean Cooling Technology Genesis M36-0616-G307 Air Conditioner enclosure?
If you're getting water in the enclosure of your McLean Cooling Technology Air Conditioner, it might be due to a plugged drain, a kinked drain tube, or the enclosure not being properly sealed, which allows humidity to enter.
How to troubleshoot no airflow from evaporator blower in McLean Cooling Technology Air Conditioner?
If there is no airflow from the evaporator blower in your McLean Cooling Technology Air Conditioner, it could be due to an open motor winding, consider repair or replacement. Another reason might be a stuck blower motor which means a defective part, or obstructed blades.
Why is there no airflow from the condenser blower in my McLean Cooling Technology Genesis M36-0616-G307?
If there is no airflow from the condenser blower of your McLean Cooling Technology Air Conditioner, this could be due to a defective thermostat, an open motor winding (repair or replace), a stuck blower motor (defective part), or obstructed wheels/blades.
Why does my McLean Cooling Technology Genesis M36-0616-G307 Air Conditioner unit blows breakers?
If your McLean Cooling Technology Air Conditioner unit blows breakers, it could be due to an undersized breaker/fuse or one that is not time delayed. It also may be caused by a short in the system.
Procedures for safely handling and testing the air conditioner before installation.
Technical drawings showing the physical dimensions of the M13 model air conditioner.
Specifications for gasket placement and cutout dimensions for M13 model enclosure mounting.
Information regarding the maintenance requirements for the air conditioner's compressor.
Guidelines for maintaining the air conditioner's inlet air filter for optimal performance.
Details on the maintenance of blower and impeller motors for the air movers.
Procedures and considerations for addressing refrigerant loss in the air conditioner system.
A checklist to help diagnose common air conditioning problems and their potential causes.
A table listing common symptoms and their potential causes for air conditioner malfunction.
Information on the process for returning products for warranty or out-of-warranty repair services.
General| Brand | McLean Cooling Technology |
|---|---|
| Model | Genesis M36-0616-G307 |
| Category | Air Conditioner |
| Language | English |
