To Next PageTo Next PageWhy is there no temperature difference in my McLean Cooling Technology Genesis M52-1216-017?
If the temperature difference between the air entering and exiting the evaporator in your McLean Cooling Technology Air Conditioner is not present, it could be due to a possible loss of refrigerant, in that case you should repair or replace the defective part. It can also be caused by bad valves in the compressor.
Why my McLean Cooling Technology Genesis M52-1216-017 Air Conditioner unit won’t cool?
If your McLean Cooling Technology Air Conditioner unit won’t cool, several factors could be at play: the impellers/blowers might not be running, the compressor could be inactive, the compressor might have bad valves even when running, or there could be a loss of refrigerant.
What to do if the condenser blower and compressor of my McLean Cooling Technology Genesis M52-1216-017 don't turn on?
If the condenser blower and compressor of your McLean Cooling Technology Air Conditioner are not turning on when the thermostat is set to the lowest setting, it could be due to a defective thermostat. In this case, consider replacing the part.
Why does my McLean Cooling Technology Air Conditioner compressor try to start but won’t run?
If your McLean Cooling Technology Air Conditioner compressor tries to start but won’t run, the issue could stem from several causes: low line voltage at start (should be +/-10% rated voltage), a stuck compressor motor, a bad contactor, a faulty overload switch, or a bad run/start capacitor.
How to fix water in my McLean Cooling Technology Genesis M52-1216-017 enclosure?
If you're getting water in the enclosure of your McLean Cooling Technology Air Conditioner, it might be due to a plugged drain, a kinked drain tube, or the enclosure not being properly sealed, which allows humidity to enter.
How to troubleshoot no airflow from evaporator blower in McLean Cooling Technology Air Conditioner?
If there is no airflow from the evaporator blower in your McLean Cooling Technology Air Conditioner, it could be due to an open motor winding, consider repair or replacement. Another reason might be a stuck blower motor which means a defective part, or obstructed blades.
Why is there no airflow from the condenser blower in my McLean Cooling Technology Air Conditioner?
If there is no airflow from the condenser blower of your McLean Cooling Technology Air Conditioner, this could be due to a defective thermostat, an open motor winding (repair or replace), a stuck blower motor (defective part), or obstructed wheels/blades.
Why does my McLean Cooling Technology Genesis M52-1216-017 unit blows breakers?
If your McLean Cooling Technology Air Conditioner unit blows breakers, it could be due to an undersized breaker/fuse or one that is not time delayed. It also may be caused by a short in the system.
Specifications and performance data for M13 air conditioners.
Detailed physical dimensions and layout for M13 units.
Gasket and cutout specifications for M13 installation.
List of all M13 series components and their part numbers.
Electrical schematic and wiring for M13 1000 BTU models.
Specifications and performance data for M17 air conditioners.
Detailed physical dimensions and layout for M17 units.
Gasket and cutout specifications for M17 installation.
List of all M17 series components and their part numbers.
Electrical schematics and wiring for M17 1800 BTU models.
Specifications and performance data for M28 air conditioners.
Detailed physical dimensions and layout for M28 units.
Gasket and cutout specifications for M28 installation.
List of all M28 series components and their part numbers.
Electrical schematics and wiring for M28 models.
Specifications and performance data for M33 air conditioners.
Detailed physical dimensions and layout for M33 units.
Gasket and cutout specifications for M33 installation.
List of all M33 series components and their part numbers.
Electrical schematic and wiring for M33 4000 BTU models.
Specifications and performance data for M36 air conditioners.
Detailed physical dimensions and layout for M36 units.
Gasket and cutout specifications for M36 installation.
List of all M36 series components and their part numbers.
Electrical schematic and wiring for M36 6000 BTU models.
Specifications and performance data for M52 air conditioners.
Detailed physical dimensions and layout for M52 units.
Gasket and cutout specifications for M52 installation.
List of all M52 series components and their part numbers.
Electrical schematics and wiring for M52 models.
Specifications and performance data for MHB11 air conditioners.
Detailed physical dimensions and layout for MHB11 units.
Gasket and cutout specifications for MHB11 installation.
List of all MHB11 series components and their part numbers.
Electrical schematics and wiring for MHB11 models.
Information on compressor maintenance and warranty considerations.
Procedure for maintaining the air conditioner's inlet filter.
Steps for cleaning or replacing the inlet air filter.
Details on air mover motor maintenance.
Guidance on refrigerant leaks, testing, and recharging.
A guide to diagnosing common air conditioner issues.
Lists common symptoms and their potential causes for air conditioners.
Details warranty coverage, conditions, and exclusions.
Procedure for product returns and repairs, including RMA requirements.
General| Brand | McLean Cooling Technology |
|---|---|
| Model | Genesis M52-1216-017 |
| Category | Air Conditioner |
| Language | English |
