Power & Input Modes
Using the ITB174 Sound Bar
Bluetooth
Connecting your sound bar wirelessly using Bluetooth
Plug the small end of the power cord into the DC Input on the back
of the speaker, and the large plug into a standard wall outlet.
Indicator Lights
Power
STATUS INDICATOR
Power O Red Light
Line In Mode Green Light
Optical Mode Amber Light
Aux In Mode White Light
Bluetooth Pairing Flashing Blue Light
Bluetooth Connected Blue Light
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power button.
2. Press the
button on the remote to switch to Bluetooth Mode, indicated by a slowly
ashing blue light.
3. Press and hold the Pair button on the side of the unit.
The pairing indicator will ash blue quickly. When pairing, remain within 3 feet
of the unit.
4. Using the native controls on your Bluetooth device, select the ITB174 in your Bluetooth
settings to pair.
If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user’s manual for your specic device for instructions on pairing and connecting
Bluetooth devices.
5. When successfully paired and connected, a beep will issue from the unit and the Pairing
Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a
reset of the device. If your device should become unpaired or you nd it is unable to connect, repeat
the above steps.
To Next Page
Need help?
General
