McQuay G11

2
10. Sleep mode setting
• Press the SLEEP button will activate the sleep mode function.
• This is an energy saving option. When the unit is operating under cooling mode,
the set temperature is increased by 0.5°C after
the first half an hour, 1°C after the second
half an hour and total of 2°C after the
following 1 hour. This function will prevent
excessive cooling during summer season.
• When the unit is operating under heating
mode, the set temperature is decreased by 1°C
after the first half an hour, 2°C after the second
half an hour and total of 3°C after the
following 1 hour. This function will prevent
night sweat during summer season.
• This function is available under COOL, HEAT and AUTO mode.
11. Clock time setting
• Press + button to increase the clock time.
• Press -- button to decrease the clock time.
12. Personalize setting
• Press and hold for 3s, then will blink. Press again to cycle between and .
• Set the desire setting, then leave the handset for 4s without pressing any key and
it will save the setting into the programme.
• Press once to activate the P1 setting, press again to cycle between P1 and P2.
• Press any key to deactivate the personalize setting.
+2 C
+1 C
- 1 C
- 2 C
0 0.5 1 1.5 2
OM-G11(CW)-0704-Acson 11/28/05, 2:49 PM2