IM709 43
K. Fan Motor Current Per Phase:  amps  amps  amps
FLA: amps
Variable Frequency Drive:   % Speed /   Hertz
L.  Fan Speed:   rpm  at above frequency
M. Unit Voltage across each phase:  volts  volts volts
N. Unit Current per phase: amps amps amps
CONTROL CHECK
A. Compressor Low and High Pressure Cut-outs:
Comp. No. 1  Comp. No. 2  Comp. No. 3  Comp. No. 4
Low Press Cut-out, psig
Low Press Cut-in, psig
High Press Cut-out, psig
Comp. No. 5  Comp. No. 6
Low Press Cut-out, psig
Low Press Cut-in, psig
High Press Cut-out, psig
GENERAL
A.  Are all control lines secure to prevent excessive vibration and wear? Yes No
B.  Are all gauge ports shut off, valve caps and packings tight after start-up? Yes No
C.  Are VAV boxes set to keep a minimum airflow of 40% of design? Yes No
D. Do the Economizer, Water Regulating, and Hot Water valves rotate freely? Yes No
Performed By:    Title: 
Signature:   Date of Start-up: 
RETURN COMPLETED FORM TO:
McQuay International 
Warranty Department 
13600 Industrial Park Boulevard
Minneapolis, MN 55441
Comments: