EasyManua.ls Logo

MCS Master DH 752 - Product Introduction

Default Icon
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THE UNIT IS SEALED AND CONTAINS FLU-
ORINATED GREENHOUSE GASES COVERED
BY KYOTO PROTOCOL.
THE “GWP” IS LISTED IN THE “TECHNICAL
SPECIFICATIONS TABLE”.
1. BEFORE USE
please do not cut off the power by pulling the
wire
please do not plug or unplug to startup or
shut off the unit
please be careful when moving the unit, do
not mangle the wire
please do not put ngers or sticks into the grid
please prohibit child to climb, stand or sit on
the unit
please unplug the unit before cleaning or
maintenance
NOTICE: WE SUGGEST THAT ANY RE-
PAIRS SHOULD BE EXECUTED BY PRO-
FESSIONAL SERVICEMEN
please make sure the unit is grounded
please do not use unit in airproof conditions
please follow the instructions thoroughly
PRODUCT INTRODUCTION
Dehumidiers can reduce air humidity in room
and thus make people live comfortably and
goods stored properly. Due to their neat appear-
ance, compact conguration, high quality and
easy operation, our dehumidiers are widely
used in research institutions, industry, transpor-
tation, medical centers, measuring institutions,
stores, underground constructions, computer
rooms, archives, warehouses, bathrooms, etc.
Keeping apparatus, meters, computers, com-
munication equipments, drugs and les away
from moisture, eroding, and mildew.
2. CONSTRUCTION
Dehumidier FIG. 1
1. Handle
2. Control panel
3. Wheel
4. Water tank
5. Water tank panel
6. Filter grill
7. Hour counter
Control panel FIG. 2
1. humidity display
2. operate indicator
3. defrost indicator
4. memory indicator
5. tank full indicator
6. memory
7. humidity up
8. humidity down
9. on/off button
3. OPERATION INSTRUCTION OF
KEYS:
ON/OFF: Press ON/OFF, the unit runs in a
circulation “ON-OFF-ON”.
Humidity up and down: Press “humidity up
and down” for once, the set humidity will in-
crease or decrease by 1%. Press the key for
1.5 seconds and the set value will increase or
decrease by 1%. Press continuously with the
speed 5 points per second.
CONTENTS
1... BEFORE USE
2... CONSTRUCTION
3... OPERATION
4... MAINTENANCE AND SAFETY
5... NOTICES ABOUT UNIT OPERATION
6... ELIMINATION DE DÉTÉRIORATIONS
en
it
de
es
fr
nl
da
no
sv
pl
ru
cs
hu
sl
hr
lt
lv
et
ro
sk
bg
uk
zh
SI
SK