MD Diagnostics RP Check - Page 24

23
Guidance and Manufacturer’s Declaration – Electromagnetic Immunity
The RP Check is intended for use in the electromagnetic environment specified below. The
customer or the user should assure that it is used in such an environment.
Immunity Test
IEC 60601 Test
level
Compliance level
Electromagnetic
environment
guidance
Radiated Immunity
IEC 61000-4-3
10V/m
10V/m
Avoid use in
environments likely
to exceed 10V/m
Electrostatic
Discharge (ESD)
IEC 61000-4-2
± 6 kV contact
± 8 kV air
± 6 kV contact
± 8 kV air
No restrictions in the
intended
environment
Electrical fast
transient/ burst
IEC 61000-4-4
N/A
N/A
None
Surge
IEC 61000-4-5
N/A
N/A
None
Voltage dips, short
interruptions and
voltage variations on
power supply input
lines
IEC 61000-4-11
N/A
N/A
None
Power Frequency
(50/60 Hz) magnetic
field
IEC 61000-4-8
N/A
N/A
None
NOTE: UT is the a.c. mains voltage prior to application of the test level.