ý
Replacing ComfortTIP
™
a) Hold Tubing with one hand and
remove ComfortTIP with other hand.
b) Align new ComfortTIP
so vented end is
lined up with Stabilizer Bar. Push Tip
over the ridges on end of Tubing.
c) IMPORTANT: The end of the Tubing should be
visible through the opening of the ComfortTIP.
Otherwise, Tube may detach from Tip when
removing VOLT from your ear.
If you are experiencing whistling at higher
volumes, remove Open ComfortTIP
and
replace with Closed ComfortTIP.
Vented
End
b)
a)
c)
Stabilizer
Bar
16
To Next Page
Loading...
