MD Volt - Replacing Thin Tubing

Replacing Thin Tubing
a) Remove Tubing: Turn Tubing Base
counter-clockwise (like a bottle cap),
or hold Tubing Base rm and twist
VOLT Body clockwise to detach.
b) Attach new Tubing: Gently turn Tubing
Base clockwise onto VOLT Body, or twist
VOLT Body counter-clockwise into Tubing Base.
c) Make sure Tubing Base is ush with
sides of VOLT Body when you are nished.
Please note: The
VOLT Body can be used for
either the left or right ear. Only Thin Tubing
and ComfortTIPs
™
are ear-specic.
b)
a)
c)
17