MD Volt - Instrument has a weak or no sound

Tube Cleaning Tips: Remove Tubing from VOLT Body. Thread Cleaning Tool Wire
through Tubing ve-six times starting at the triangular Tubing Base. Then wipe
debris from Tubing/Tip and reattach Tubing to VOLT Body.
3. Instrument has a weak or no sound.
• Make sure your MDHearingAidVOLT
is turned ON.
• Rotate Volume Dial (on/off control)
back and forth, in case dust or lint
has collected in the controls.
• Make sure VOLT is fully charged.
• Remove Tubing from VOLT Body
and rotate Volume Dial to three. If it
whistles, your VOLT is working and
the Tubing/Tip needs to be cleaned
or replaced.
• If you are still having difculty,
please email us at
support@
MDHearingAid.com.
26