EasyManua.ls Logo

MDC Robson XTT 2015 - Brake Adjustment

Default Icon
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.marketdirect.com.au
I
Ph: 1300 494 494
I
©Copyright
I Page | 37
Brake Adjustment
Brakes should be adjusted (1) after the first 300 km’s of operation when the brake shoes and drums have
“seated,” (2) at 5000 km’s intervals, (3) or as use and performance requires. The brakes should be adjusted in the
following manner:
Never crawl under your trailer unless it is resting on properly placed jack stands. Do not
place supports on any part of the suspension system and use the designated jack point or
under the spring base plate to jack trailer.
Brake Cleaning and Inspection
Your trailer brakes must be inspected and serviced at 5000km or more often as required by use and performance.
Magnets and shoes must be changed when they become worn or scored to avoid inefficient vehicle braking.
Brake Lubrication
This should only be done by qualified persons.
Caution
Do not get grease or oil on the brake linings, drums or magnets.

Table of Contents