Charger Information
The charging dock is magnetic—simply place VOLT
on it forward or backward. It will turn o automatically
and start to charge. A sensor stops the charging
process once the battery is full, so there is no risk
of battery degeneration if VOLT is le on the charger.
Charger Assembly:
The charger is made up of three pieces: a cord,
a power adapter, and a charging dock.
1. Connect charging dock to the small end of the cord.
2. Connect the other end of the cord (USB) to the power adapter.
1)
2)
Charging
Dock
Cord
(small end)
Cord
(USB end)
Power
Adapter
Please note: If the charging light on VOLT turns red,
unplug and replug in the charging dock.
8
To Next Page
Loading...
