Device has a weak or no sound.
• Trapped moisture may be distorting
the sound. Consider using a hearing
aid dehumidifier overnight.
• Make sure the VOLT is on (see page 9).
• Make sure VOLT is charged. If unsure,
turn VOLT o and charge until blue
light turns green. Turn VOLT back on.
• Remove tubing from VOLT body
(see page 18) and rotate volume dial
to four (4). If it whistles, your VOLT is
working and wax or debris may be
blocking the sound.
• Clean tubing/tip (see page 14) and
ear canal. Replace tubing/tip if they
appear worn.
If you are still having diiculty, please contact us at 800-918-3914
or support@MDHearingAid.com.
24
To Next Page
Loading...
