Device has a weak or no sound.
• Trapped moisture may be distorting
the sound. Consider using a hearing
aid dehumidifier overnight.
• Make sure the VOLT is on
(see page 11).
• Make sure VOLT is charged. If
unsure, turn VOLT o and charge
until blue light turns green. Turn
VOLT back on.
• Remove tubing from VOLT body
(see page 16) and rotate volume
dial to three (3). If it whistles, your
VOLT is working and wax or debris
may be blocking the sound.
• Clean tubing/tip (see page 13)
and ear canal. Replace tubing/tip
if they appear worn.
If you are still having diiculty, please contact us at 312-366-3899
or support@MDHearingAid.com.
24
To Next Page
Loading...
