2
EN
how to use
Step 1: preparing for me
Watch our demonstrational video at www.mepower.com
Remove hair in the area you intend to treat.
Step 2: sensitivity test
Before treating any new area with
me
, test a small patch of skin near the area
you intend to treat.
is me for you?
3
1
2
1. Press the power button on the base unit to turn the
system on.
2. Press the appropriate
level button (Low, Medium or
High) on the base unit to select the desired
energy.
It is recommended to start with Low level, and if you feel
comfortable, raise the
level.
3. Press the
activation button on the applicator.
4. Place the applicator on the area you want to treat,
ensuring full contact of the two chrome (silver color) RF
delivery bars with the skin. Do not press, just gently touch the
skin. System will start emitting
pulses.
5. Glide the applicator slowly and continuously on the
treatment area without stopping in one place.
Do not return to the same spot for at least 10 seconds.
Step 3: treating with
me
quick reference guide
5
me is intended for body use on ALL skin tones
(skin color you are born with).
To Next Page
Loading...
