What to do if there are no light flashes from the cartridge treatment window on my Me ELOS?
To ensure the Me Hair Removal System flashes pulses, verify that the RF skin contact bars are in contact with your skin, the cartridge activation button is on, and an elōs level is selected.
Is it normal to feel pain and warmth when using the Me Hair Removal System?
It's normal to feel warmth, tingling, or itching when using the Me Hair Removal System. This sensation should be up to moderate. However, if you experience severe or intense pain, or if the pain lasts longer than 24 hours after treatment, discontinue use and consult your doctor or Customer Support.
How to fix the blinking error light on my Me Hair Removal System?
If the error light is blinking on your Me Hair Removal System, you may need to reset the system. To do this, disconnect the power cord, wait for all lights to turn off (this may take up to 2 minutes), then reconnect the power cord and turn the system back on.
What to do if the error light is blinking red and cartridge buttons are blinking on my Me Hair Removal System?
If the error light is blinking red and the cartridge buttons are also blinking on your Me Hair Removal System, it indicates that the ambient room temperature is too high. Move to a cooler area where the room temperature is below 86 degrees Fahrenheit (30 degrees Celsius) and then restart the system.
Why is the cartridge activation button blinking on my Me ELOS Hair Removal System?
The cartridge activation button flashes on the Me Hair Removal System when an elōs energy level has been selected, indicating that the button needs to be pressed. Press the cartridge activation button. The applicator fan will start blowing indicating that the el?s cartridge is active.
Why are all the elōs energy level lights blinking on my Me ELOS?
If all the elōs energy level lights are blinking on your Me Hair Removal System, it means that no elōs energy level has been selected. Select an elōs level. The applicator fan will start blowing indicating that the cartridge is active.
What to do if the cartridge activation button does not turn on (no blue light) on my Me ELOS?
If the cartridge activation button on your Me Hair Removal System does not turn on (no blue light), the system may need to be reset. Disconnect the power cord, wait for all lights to turn off (up to 2 minutes), then reconnect the power cord and turn the system back on.
Why are no lights on the control panel of my Me ELOS?
If no lights are on the control panel of your Me Hair Removal System, it is likely that the power cable is not connected. Connect the power cable.
Explains how the system reduces hair growth over time and the cumulative process.
Details suitable skin types (1-5) and hair colours for safe and effective treatment.
Specifies which body areas are approved for hair removal treatment.
Describes the combination of IPL and RF energy targeting hair follicles.
Explains hair growth phases and what to expect post-treatment.
Lists the main components included in the mē system packaging.
Lists additional accessories available for separate purchase.
Identifies the base unit and its cradle for housing the applicator.
Details the applicator, control panel, and the replaceable elōs cartridge.
Explains the light output window and RF skin contact bars for proper function.
Describes the cartridge activation button, cooling inlet, and protective cap.
Lists conditions and situations where the mē system should not be used.
Covers warnings about device modification, liquid contact, and ventilation slots.
Advises against holding the applicator on one spot and using damaged parts.
Emphasizes child supervision and performing skin sensitivity tests.
Warns against leaving the device unattended and using it above specified temperatures.
Details possible skin reactions and recommended actions, including consulting a doctor.
Guides on connecting power, placing the applicator, and turning the system on.
Guides on testing the system on a small skin area before full treatment.
Explains how to apply treatment pulses, move the applicator, and optimize coverage.
Recommends weekly treatments for the first 7 weeks and subsequent maintenance.
Introduces considerations for treating facial hair, including adaptors.
Explains why facial hair removal differs from body hair due to physiology and sensitivity.
Lists specific conditions and prior treatments that contraindicate facial use.
Details areas on the face and scalp that must not be treated.
Advises on protecting sensitive skin and avoiding products post-treatment.
Covers cleaning, hair removal, and concealing sensitive facial areas before treatment.
Details applying pulses, adjusting levels, and treatment frequency for facial areas.
Guides on cleaning the applicator, cartridges, and main system unit.
Instructs on storing the device safely and disposing of cartridges responsibly.
Step-by-step guide for removing and installing a new elōs cartridge.
Instructions for attaching and detaching interchangeable shaver, epilator, or face adaptors.
Covers safe disposal of cartridges and compliance with WEEE regulations.
Explains universal voltage and the need for plug adaptors when traveling internationally.
Explains meanings of control panel lights and buttons and how to react.
Addresses issues like skin redness, effectiveness, and pain during treatment.
Details warranty information, service procedures, and customer support contact information.
Identifies Syneron Medical Ltd. and HoMedics Group Ltd. as manufacturers and distributors.
Mentions patents, trademarks, and copyright associated with the mē product.
Explains the details found on the system's nameplate label.
Interprets various symbols indicating safety, compliance, and usage restrictions.
Lists light spectrum, optical power, RF frequency, and power ratings.
Details acceptable temperature, humidity, and altitude for storage and operation.
General| Brand | Me |
|---|---|
| Model | ELOS |
| Category | Hair Removal System |
| Language | English |
To Next Page
