What does it mean if the “Empty” indicator is blinking on my Me Hair Removal System?
If the “Empty” indicator is blinking on your Me Hair Removal System, it means there is only 5% left in the el?s cartridge. Order a new el?s cartridge if you plan to continue treatments.
What to do if error light is on on Me Hair Removal System?
If the error light is on, reset your Me Hair Removal System by turning it off and on again. If the problem continues, disconnect the power cord, wait for all lights to turn off, then reconnect it and turn the system back on. If the error light persists, move to a cooler area (below 30ºC/86ºF) and restart the system.
What to do if my skin is red after using Me Smooth?
Redness can occur after treatment with the Me Hair Removal System and usually disappears within 24 hours. If the redness lasts longer than 24 hours, discontinue use.
Why are all energy setting buttons blinking on my Me Hair Removal System?
If all the energy setting buttons (High-Medium-Low) are blinking, it means that no energy level has been selected. Select an energy level to proceed. Once selected, the applicator fan will start, indicating the cartridge is active.
Why is the activation button on the applicator of my Me Hair Removal System blinking?
If the activation button is blinking, it means an energy level was selected, but the activation button hasn't been pressed yet. Press the activation button. The applicator fan will then start blowing, indicating that the cartridge is active.
What does it mean if the “Empty” indicator is constantly on on my Me Smooth?
If the “Empty” indicator is constantly on for your Me Hair Removal System, it means there are no more pulses remaining in the el?s cartridge. Insert a new el?s cartridge.
Why is the accessory activation button flashing on my Me Smooth Hair Removal System?
If the accessory activation button on the base of your Me Hair Removal System is flashing, it indicates that the accessory slot is empty. Insert the protective cap or attach the desired accessory.
Why is the el?s energy button flashing on my Me Smooth?
If the el?s energy button on the base of your Me Hair Removal System is flashing, it means that the el?s cartridge slot is empty. Insert an el?s cartridge or a protective cap.
Why I barely see any hair reduction with Me Hair Removal System?
Hair reduction results vary depending on the treated body area and adherence to instructions. Ensure you are following the suggested protocol and treatment duration.
Is it normal to feel warmth when using Me Smooth Hair Removal System?
Yes, it’s normal to feel warmth, tingling, or itching when using the Me Hair Removal System. This discomfort and warmth should be up to moderate.
Defines the intended use of the mē system for hair removal, covering skin tone, hair color, and body areas.
Lists the items included in the mē system package.
Identifies and describes the main components of the mē system based on Figure 1.
Details the components of the applicator part of the mē system with reference to Figure 2.
Lists specific conditions and situations where the mē system should not be used due to safety risks.
Provides crucial warnings about device usage, handling, and potential hazards like electric shock and overheating.
Emphasizes keeping the device away from children and outlines precautions for sensitive skin and hair color.
Lists rare but possible side effects of using the mē system and advises consulting a doctor.
Provides step-by-step instructions for setting up the mē system before first use.
Details the procedure for performing a skin sensitivity test before full treatment.
Outlines skin preparation, device setup, energy level selection, and initial pulse emission.
Explains the correct gliding motion for treatment and provides tips for effective coverage.
Provides a recommended schedule for treatments to achieve optimal hair removal results.
Instructions for cleaning and storing the mē system to maintain its condition.
Advises on how to care for the skin after treatment, including sun exposure warnings.
Step-by-step instructions for removing and replacing the elōs cartridge in the applicator.
Details proper disposal of used elōs cartridges and protective cap usage.
Information on using the mē system internationally, including voltage and travel accessories.
Explains what different indicator lights mean and how to troubleshoot common device errors.
Addresses issues related to accessory slots, cartridge status, and skin reactions post-treatment.
Outlines the warranty terms, coverage, and limitations for the mē device.
Covers responsibilities for shipping costs and intellectual property rights related to the document.
Provides details about the manufacturer, Syneron Beauty Ltd., and their intellectual property rights.
Interprets the various labels and symbols found on the mē system's nameplate.
Lists the technical specifications, safety standards, and EMC standards the device complies with.
Details the temperature, humidity, and altitude requirements for storage and operation.
Provides contact details for customer support and further information about the mē system.
General| Brand | Me |
|---|---|
| Model | Smooth |
| Category | Hair Removal System |
| Language | English |
To Next Page
