23
EN
manufacturer information
Labels And Symbols
The nameplate label is adhered to the bottom of your me system. It displays
the manufacturer’s name & address, the system’s part & LOT numbers, electrical
requirements and regulatory standards that the system is designed to
comply with.
Degree of protection against ingress water: IPX1
This device is not suitable for use in the presence of ammable anesthetic mixture
with air or with Oxygen or Nitrous Oxide.
Class
||
equipment
ETL Mark for USA and Canada
CE Mark
WEEE - Waste Electrical and
Electronic Equipment
Degree of protection against
electric type BF applied part
Do Not use in wet environment
Follow operating instructions
To Next Page
Loading...
