What to do if error light is on on Me Hair Removal System?
If the error light is on, reset your Me Hair Removal System by turning it off and on again. If the problem continues, disconnect the power cord, wait for all lights to turn off, then reconnect it and turn the system back on. If the error light persists, move to a cooler area (below 30ºC/86ºF) and restart the system.
Defines the intended use of the mē system for hair removal, covering skin tone, hair color, and body areas.
Lists the items included in the mē system package.
Identifies and describes the main components of the mē system based on Figure 1.
Details the components of the applicator part of the mē system with reference to Figure 2.
Lists specific conditions and situations where the mē system should not be used due to safety risks.
Provides crucial warnings about device usage, handling, and potential hazards like electric shock and overheating.
Emphasizes keeping the device away from children and outlines precautions for sensitive skin and hair color.
Lists rare but possible side effects of using the mē system and advises consulting a doctor.
Provides step-by-step instructions for setting up the mē system before first use.
Details the procedure for performing a skin sensitivity test before full treatment.
Outlines skin preparation, device setup, energy level selection, and initial pulse emission.
Explains the correct gliding motion for treatment and provides tips for effective coverage.
Provides a recommended schedule for treatments to achieve optimal hair removal results.
Instructions for cleaning and storing the mē system to maintain its condition.
Advises on how to care for the skin after treatment, including sun exposure warnings.
Step-by-step instructions for removing and replacing the elōs cartridge in the applicator.
Details proper disposal of used elōs cartridges and protective cap usage.
Information on using the mē system internationally, including voltage and travel accessories.
Explains what different indicator lights mean and how to troubleshoot common device errors.
Addresses issues related to accessory slots, cartridge status, and skin reactions post-treatment.
Outlines the warranty terms, coverage, and limitations for the mē device.
Covers responsibilities for shipping costs and intellectual property rights related to the document.
Provides details about the manufacturer, Syneron Beauty Ltd., and their intellectual property rights.
Interprets the various labels and symbols found on the mē system's nameplate.
Lists the technical specifications, safety standards, and EMC standards the device complies with.
Details the temperature, humidity, and altitude requirements for storage and operation.
Provides contact details for customer support and further information about the mē system.
General| Brand | Me |
|---|---|
| Model | Smooth |
| Category | Hair Removal System |
| Language | English |
To Next Page
