Meade Infinity User Manual

Attach red-dot nder
Attach diagonal mirror
Attach 26mm eyepiece
Focus and
observe!
Open tripod
STEP
2
Attach accessory tray
STEP
3
Extend tripod legs
STEP
4
STEP
6
Attach optical tube
STEP
7
STEP
8
STEP
9
STEP
11
Remove
cover
Download the instruction
manual or AutoStar Suite so-
ware by scanning the QR code
or navigating to:
Attach slow-motion rod
STEP
5
STEP
10
https://www.meade.com/innity-support-resources
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun.
Meade Innity 70mm Refracting Telescope
®
™
Quickstart Guide
focus
adjust
STEP
1

Meade Infinity Specifications

General

Optical Design	Refractor
Mount Type	Alt-azimuth
Diagonal	90° erect-image diagonal
Tripod	Aluminum
Aperture	70mm
Focal Length	700mm
Focal Ratio	f/10

Summary

Telescope Assembly and Setup Steps

Download Resources

Download the instruction manual or AutoStar Suite software by scanning the QR code or navigating to the provided URL.

Prepare Tripod and Attach Tray

Open the tripod, extend its legs, and attach the accessory tray for stability and convenience.

Assemble Optical Components

Attach the slow-motion rod, optical tube, red-dot finder, and diagonal mirror to the telescope assembly.

Install Eyepiece and Prepare for Observation

Attach the 26mm eyepiece, remove the objective lens cover, and adjust focus for clear viewing.

Critical Sun Safety Warning

Warning against pointing the telescope at or near the Sun due to irreversible eye damage.