17
Looking at or near the Sun will cause irreversable damage to your eye. Do not point
this telescope at or near the Sun. Do not look through the telescope as it is moving.
SPECIFICATIONS
10" Standard Model
OT ebut latem egac reppU .ngised ssurt nepOA
containing spider and secondary mirror holder,
focuser with attachment points for truss tubes.
Lower metal tube containing mirror cell, altitude
bearings, battery powered fan, with truss tube
attachment castings and captive bolts and knobs.
Truss tubes Black anodized aluminum with attachment hardware
and captive bolts. Machined aluminum altitude
bearings.
Secondary Mirror Support 4-vane, steel
Mirror 10"
Focal length 1270mm (50")
Focal ratio f/5
Resolving Power 0.56 arc seconds
Limiting visual magnitude 14
Focuser
.htumiza rof sgniraeb Roller htiw esab leviwStnuoM
Base bearings Three roller bearing plates
Eyepiece tray For one 2” and three 1.25” eyepieces mounted on
one side of the base.
Eyepiece Meade 26mm QX Wide Angle Eyepiece.
Dust Cover To fit over primary mirror inside of lower tube.
Finder Deluxe red dot
Attach eyepiece tray to side or
back base panels.
Computer Software CD-ROM of Autostar Suite Astronomer's Edition soft-
ware
Assembled OTA weigh 38 lbs.
Assembled Mount weight
27 lbs.
Total Assembled telescope wt. 65 lbs.
10 to 1 dual-speed 2" Crayford style machined
aluminum with 1.25” adapter.
To Next Page
Loading...
